Login

Mining-Engineering

Welcome to the East Coast Master Blasters Mining-Engineering section. 

East Coast Master Blasters (ECMB) was set up to cater for Engineering and Mining needs on the Central Coast.

Not using conventional methods to blast with (sand, soda or similar) but utilising Crushed Glass. There are absolutely no chemicals of any kind and most importantly, NO SILICA.  The Crushed Glass is a pure component with no additives from human hands.

Having understood the problems associated with previous methods where with using sand for instance, you had to blow at 140 to 160 PSI to get any result, which then caused irreparable damage to components which rendered the components unusable. With Soda, it never disappears and is always sitting in the pores of the material, even known to worm its way to the surface under the very best paint preparation and finished jobs. 

We currently service several mine component companies and engineering firms with both NON abrasive blasting and also offer the facility to coat the blasted products in several coatings of their choice.  This side of the business is growing rapidly filling a large void in the Industrial sector.

We blow our jobs under 55 PSI, relying on the denseness of the product to remove the unwanted particles or contaminants.  At under 55 PSI, there is NO WAY that any damage can be done to the blasted units, making this process the safest way to prepare your components for final finishing.

Because of the media used and the finish left on the components, our blasting is graded as Class #3.

Simply put, THERE IS NO HIGHER CLASSIFICATION IN BLASTING.

East Coast Master Blasters = Class #3 Blasting = Superb finishes!  What else could you ask for?

Call us to see if we can help........

feedback